Bleaching (Pretreatment Chemicals)

Mse Chemicals Bleaching (Pretreatment Chemicals)

POLIWET ATS

  • Thanks to its durability in all wetting operations, it can be used successfully in all areas except mercerizing.
  • It is used as a washer, wetting agent and dirt carrier in desizing, alkaline boiling, pretreatment cooking (chlorine, peroxide, sodium chloride bleaching).
  • Thanks to its wetting power, it is very successful in allowing other chemicals to penetrate the fiber well and quickly.
  • As there is no retarding effect against dyestuffs, it is used in Direct, Reactive, Cube and Disperse dye materials in continuous and discontinuous dyeing processes.

POLIBLEACH G

  • It makes the use of oil remover, ion scavenger, stabilizer, anti-breakage and caustic in bleaching process unnecessary.
  • Contains chemicals that optimally activate and stabilize bleaching agents.
  • The foam is controlled, including jet machines.
  • Storage provides a great advantage from factors such as time and labor.
  • Blood output provides a softer handle, possible fractures are prevented.
  • The strength of the fabric increases.
  • Fire rates are reduced.

STABILON JET

  • Air absorber and wetting material specially developed for use in bobbin dyeing and beam dyeing machines

ANTIPER ENZYME

  • Antiper Enzyme shortens the water requirement and time in post bleaching washing and neutralizing.
  • The presence of Antiper Enzyme in the dyeing bath does not affect the dyeing process.
  • The presence of peroxide and sulfur-based reducers on the fabric affects the color. It is very important to remove hydrogen peroxide residues after cotton bleaching. Peroxide residue is removed by boiling washes after bleaching, and it also performs the same task in reducing agents such as thiosulfate, thiourea, hydrosulphite. Nowadays, when environmental protection is required, as the number of treatment plants increases, sulfur and its derivatives are not desired in treatment plants, necessitating minimizing the use of these materials. Therefore, considering the energy and time waste of boiling washes, the importance of enzymatic peroxide removers increases.

POLIOXIL YS

  • It dissolves the dirt and oil that gets on the fabric during weaving and knitting.
  • By holding it in an emulsified state, it prevents it from sticking to the fabric again.
  • It is a solvent-free oil remover.

POLIOXIL CONS

  • Solvent oil remover,
  • Provides the removal of hard-to-remove animal and vegetable oils from the fiber,
  • It gives excellent results in removing stubborn oily stains coming from machines during the production of synthetic blended fabrics.
  • Can be used for machine cleaning.

STABILON PK

  • Stabilon PK is a highly effective wetting and degreasing agent developed with jamac for the use of cotton, viscose, synthetic fibers and their blends in hydrogen peroxide bleaching.
  • Stabilon PK is designed in accordance with automation, its foam is controlled.
  • Stabilon PK is environmentally friendly. It is produced from completely biodegradable raw materials.
  • Wetting, removal and emulsification of natural and mineral oils, detergents are carried out simultaneously in the bleaching bath.
  • As a result of all this, it provides a high degree of and homogeneous absorbency, a high degree of fiber strength and good whiteness in cellulosic fibers.
  • Logistics is easy.
  • Low inventory cost.
  • Minimizes errors in the prescription preparation phase.
  • Easy to dose.
  • Reduces prescription cost.

STABILON 300

  • Stabilon 300 is a highly effective wetting and degreasing agent developed with jamac for the use of cotton, viscose, synthetic fibers and their blends in hydrogen peroxide bleaching.
  • Stabilon 300 is designed for automation, its foam is controlled.
  • Stabilon 300 is environmentally friendly. It is produced from completely biodegradable raw materials.
  • Wetting, removal and emulsification of natural and mineral oils, detergents are carried out simultaneously in the bleaching bath.
  • As a result of all this, it provides a high degree of and homogeneous absorbency, a high degree of fiber strength and good whiteness in cellulosic fibers.
  • Logistics is easy.
  • Low inventory cost.
  • Minimizes errors in the prescription preparation phase.
  • Easy to dose.
  • Reduces prescription cost.

POLIBLEACH OXA

  • POLYBLEACH OXA is a special composition to be used as an aid to pretreatment and dyeing in one step.
  • It has a structure that prevents wing differences, ensures reproducibility, and increases the leveling properties of dyes in the dyeing of cellulosic fibers such as cotton, viscose, modal, linen and their mixtures with synthetic fibers such as polyester with reactive dyes.
  • Product; It is suitable for all reactive dyestuffs and all dyeing conditions applied for this type of dyeing, regardless of system and machine types.
  • It shows its leveling feature by reducing the fixation speed of the dye in a controlled manner after the alkali application and equalizing it all over the bath. It has no negative effect on color yield and color tone.
  • The use of the product allows the alkali to be delivered to the bath in a short time.
  • The product also ensures that the dye is evenly distributed on the material in the phase after salt is added to the bath.
  • Lubricant and anti-fracture substances contained in this product will reduce the possibility of fracture. In addition, internal-external differences are frequently observed in bobbin dyeing. The paint braking feature of POLYBLEACH OXA prevents these differences. The effectiveness of the product will be observed from the first use.
  • Ion scavenging and colloid effect: It also prevents problems that may arise with insufficient pretreatment of cellulosic fibers and their mixtures with elastane in cases where the quality of the water used varies.
  • POLYBLEACH OXA can be added into the solution when reactive dyes, especially phtalocyanin-based, large molecule blue, green and turquoise dyes dissolve